 Bosch D9412GV2 Control Panel : Alarm Solutions
 The D9412GV2 Control Panel provides an integrated solution
for access control, intrusion, and fire alarm system applications. Monitor alarm points for intruder or fire alarms
while operating user command centers and other outputs.
The D9412GV2 Control Panel includes a communicator that
sends events to selected public switched telephone network
(PSTN) or IP network destinations through four
programmable route groups. Program all system functions
on-site through a D5200 Programmer or remotely through
Remote Programming Software (RPS).
Add up to eight doors of access control using the optional
D9210BLC Access Control Interface Module.
The D9412GV2Control Panel provides up to 246 individually
identified points. Each point accommodates normally-open
(NO) and normally-closed (NC) devices with end-of-line
(EOL) resistor supervision. Program points for fire, fire
supervisory, or intrusion applications.
Functions
Programmable Outputs
- 2 A alarm power at 12 VDC
- 1.4 A auxiliary power at 12 VDC
- Four alarm output patterns
- Programmable bell test
- Programmable bell shut-off timer
System Response
- 31 custom point indexes, including fire supervisory
- Selectable point response time
- Cross point capability
- Watch mode
- Scheduled events (skeds) arm, disarm, bypass and unbypass points, control relays, control authority levels, and control door access
Two Man Rule
Two Man Rule requires two unique passcodes on the same
command center to disarm an area. Without the second
passcode, the system denies entry. Two Man Rule requires the presence of two people at opening, providing added security.
Early Ambush
Early Ambush requires two passcode entries on the same
command center. Enter the same passcode twice or have two
unique passcodes, depending on the configuration. The first
entry disarms the area and the second entry stops a timer
programmed to send a duress event. If the second entry does
not occur within the programmed time, the system generates
a duress event. Early Ambush allows users to inspect the
premises and use the system to confirm that the area is safe to
enter, providing added security.
 Easy Exit Control
The D9412GV2 Control Panel changes from one armed state
to another armed state without disarming. For example, if you
change the state from Master Arm to Perimeter Arm, the
control panel complies and reports the change. Easy Exit
Control reduces the number of keystrokes, simplifying system
operation.
Programmable Passcode-controlled Menu List
The system prompts users to enter a passcode prior to viewing
the command center menu. The command center display
shows the user the menu options allowed according to the
user's authority level. Passcode-controlled menus provide
users only with the options and information pertinent to
them, simplifying system operation.
Invisible Walk Test
A menu item allows the user to test invisible 24-hour points
within the scope of the command center without sending a
report to the central station.
Passcodes
User passcodes contain three to six digits. Assign each user one
of fourteen customized authority levels in each area. Restrict
passcodes to operate only during certain times.
The Two Man Rule and Early Ambush options require two
passcodes, providing additional security in financial
establishments such as banks.
Communications
The D9412GV2 Control Panel prioritizes and sends reports to
four route groups. Each group has a programmable primary
and backup destination.
The D9412GV2 works with the D6600 NetCom
Communications System using a DX4020 Network Interface
Module. It has programmable anti-replay anti-substitution
features when using a DX4020.
The Modem IIIa2 Communications Format, available with
Bosch receivers, adds reporting capabilities such as:
- Individual point numbers and text
- Opening or closing reports by area number
- Remote programming attempts
- Diagnostic reports
- Sends user names to the central station
Security Detection
The D9412GV2 Control Panel provides eight on-board
points, and up to 238 additional off-board points (depending
on model and expansion interfaces). You can program
individual points to monitor all types of burglar alarms, and supervision devices.
|
Home 
Site Map 
Privacy 
Search 
